Wissenschaftliche Publikationen

2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2000-2005

2023

Dillenhöfer, F., Künne, B., Frye, S., Haertel, T., Altland, L., Kossack, F., Bender, B., Sersch, A., Gust, P., Lattner, Y., Müller, M., Hinse, D., Pantke, K., Bechthold, J., Frank, J., Richard, T.
Development of Modular E-Learning Materials as OER for a MOOC
In: 17th International Conference on E-Learning and Digital Learning. Presented at the International Conference on e-Learning and Digital Learning, Springer International Publishing, Cham.

Kossack, F., Bender, B.
Individualization in engineering design education : implementation of an adaptive e-learning environment (ADE-LE)
Proceedings of the Design Society 3, 2295–2304. https://doi.org/10.1017/pds.2023.230

Kossack, F., Kattwinkel, D., Bender, B.
Potential of adaptive e-learning for engineering design education
in: Gómez Chova, L., González Martínez, C., Lees, J. (Eds.), ICERI2023 Proceedings. Presented at the International Conference of Education, Research and Innovation, IATED, Valencia, pp. 4665–4672. https://doi.org/10.21125/iceri.2023.1162

Kossack, F., Kattwinkel, D., Bender, B.
Potentiale adaptivem E-Learnings in der Konstruktionslehre, in: Technikdidaktik - veränderte Perspektiven des Lehrens und Lernens durch Technologien
Presented at the Technikdidaktik-Symposium, TU Darmstadt, Darmstadt, pp. 36–37.

Kossack, F., Uttich, E., Bender, B.
Potential of adaptive e-learning for knowledge heterogenous groups of students in engineering design education
in: Sampson, D.G., Ifenthaler, D., Isaías, P. (Eds.), CELDA 2023 Proceedings. Presented at the International Conference on Cognition and Exploratory Learning in the Digital Age, IADIS - International Association for Development of the Information Society, s. l.

Lipphaus, A., Tüshaus, L.
Die Drei-Punkt-Abstützung im Rahmen der ESIN-Osteosynthese langer Röhrenknochen im Wachstumsalter - eine biomechanische Betrachtung und Finite-Elemente-Analyse
Kongress für Kinder in Orthopädie und Unfallchirurgie, May 20, Garmisch-Partenkirchen

Remus, R., Selkmann, S., Lipphaus, A., Neumann, M., Bender, B.
Muscle-driven forward dynamic active hybrid model of the lumbosacral spine: combined FEM and multibody simulation
Frontiers in Bioengineering and Biotechnology 11, 1–23. https://doi.org/10.3389/fbioe.2023.1223007

Remus, R., Lipphaus, A., Selkmann, S., Bender, B.
Biomechanical effects of lumbar multifidus and psoas major muscle dysfunction on the lumbosacral spine
In: ESB 2023: 28th Congress of the European Society of Biomechanics. Presented at the ESBiomech 2023, European Society of Biomechanics, Maastricht, p. 587

Remus, R., Neumann, M., Lipphaus, A., Bender, B.
Biomechanical influence of the cage lordosis in an anterior lumbar interbody fusion at L4-L5: A simulation study
In: ISB/JSB 2023: XXIX Congress of International/Japanese Society of Biomechanics . Presented at the ISB/JSB 2023, International Scoiety of Biomechanics, Fukuoka, p. 276

Selkmann, S., Baier, J., Remus, R., Neumann, M., Bender, B
Simulation environment for the development of neuromuscular stimulation systems
In: ESB 2023: 28th Congress of the European Society of Biomechanics. Presented at the ESBiomech 2023, European Society of Biomechanics, Maastricht, p. 635

Stottrop, M., Engels, A., Bender, B.
Polymerbeschichtetes Großgleitlager: Experimentelle Untersuchung eines Radialkippsegmentlagers mit Submillimeter-Polymerbeschichtung
In: Gleit- und Wälzlagerungen 2023. Presented at the VDI-Fachtagung Gleit- und Wälzlagerungen, VDI-Verlag, Düsseldorf. https://doi.org/10.51202/9783181024157-195

Stottrop, M., Engels, A., Weißbacher, C., Bender, B.
Experimental investigation of a large tilting-pad journal bearing with a direct-bonded sub-millimeter PEEK lining
In: Proceedings of ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition. Presented at the ASME Turbo Expo, ASME, New York, NY. https://doi.org/10.1115/gt2023-101502

Sure, C., Selkmann, S., Neumann, M., Bender, B.
Differentiating activity of forearm finger flexors and extensors for SEMG biofeedback training
In: ISB/JSB 2023: XXIX Congress of International/Japanese Society of Biomechanics . Presented at the ISB/JSB 2023, International Scoiety of Biomechanics, Fukuoka, p. 537

Tröbs, R.-B., Baranski, T., Lipphaus, A., Nissen, M.
Pyloric Stenosis and Nonbilious Vomiting in Infants: Negative Base Excess and Hypercapnia—Two Opposing Points of One Scale a Comparative Case Series.
Open Journal of Pediatrics 13, 104-112. https://doi.org/10.4236/ojped.2023.131014

2022

Arbab, D., Bouillon, B., Lüring, C., Gutteck, N., Lipphaus, A., Lichte, P.
Therapie der kalzifizierten Insertionstendinopathie der Achillessehne über einen transtendinösen Zugang
Operative Orthopädie und Traumatologie 34:405–418. https://doi.org/10.1007/s00064-022-00793-4

Hagemann, T., Vetter, D., Wettmarshausen, S., Stottrop, M., Engels, A., Weißbacher, C., Bender, B., Schwarze, H.
A design for high-speed journal bearings with reduced pad size and improved efficiency
Lubricants 10. https://doi.org/10.3390/lubricants10110313

Lipphaus, A., Hamad, S., Wegener-Panzer, A., Witzel, U.
Finite-Elemente-Analyse eines deformierten Femur und virtuelle Korrektur mittels Fassier-Duval Teleskopnagel
l35. Jahrestagung der Vereinigung für Kinderorthopädie e.V., May 2, Göttingen

Lipphaus, A., Wegener-Panzer, A., Tröbs, R.-B., Witzel, U.,
Cellular senescence in a mechanobiological model of longitudinal bone growth of the femur
27th Congress of the European Society of Biomechanics, June 26-29, 2022, Porto, Portugal

Kossack, F., Kattwinkel, D., Bender, B.
Adaptive E-learning for the engineering design education at Ruhr-University Bochum.
Proceedings of the Design Society 2, 2313–2322. https://doi.org/10.1017/pds.2022.234

Kossack, F., Bender, B.
Heterogene Studierendengruppen als Herausforderung in der Konstruktionslehre.
Proceedings of the 33rd Symposium Design for X (DFX2022). https://doi.org/10.35199/dfx2022.07

Krahl, A., Lipphaus, A., Sander, P.M., Witzel, U.
Determination of muscle strength and function in plesiosaur limbs : finite element structural analyses of Cryptoclidus eurymerus humerus and femur.
PeerJ 10. https://doi.org/10.7717/peerj.13342

Remus, R., Lipphaus, A., Hoffmann, A., Neumann, M., Bender, B.
An inverse dynamic active hybrid model to predict effects of the intra-abdominal pressure on the lumbar spine
27th Congress of the European Society of Biomechanics, June 26-29, 2022, Porto, Portugal

Stottrop, M., Buchhorn, N., Bender, B.
Experimental Investigation of a Large Tilting-Pad Journal Bearing—Comparison of a Flooded and Non-Flooded Design
Lubricants [ISSN: 2075-4442] 10, 83. https://doi.org/10.3390/lubricants10050083

Stottrop, M., Engels, A., Bender, B.
Axial profiles for compensation of non-parallel fluid film geometry in multilobe journal bearings
Proceedings of the 7th World Tribology Congress 2022

Tröbs, R.-B., Lipphaus, A., Nissen, M.
Praktische Ausbildung zum Erlernen der pädiatrischen Leistenherniotomie benötigt zusätzliche Operationszeit
Kongress für Kinder- und Jugendmedizin. 7.-10. September, Düsseldorf

Wanieck, K., Hamann, L., Bartz, M., Uttich, E., Hollermann, M., Drack, M., Beismann, H.
Biomimetics linked to classical product development: An interdisciplinary endeavor to develop a technical standard
Biomimetics 7, 36. https://doi.org/10.3390/biomimetics7020036

2021

Bender, B.
Requirements Engineering in the Context of IDE.
In Integrated Design Engineering (pp. 587-614). Springer, Cham.

Bartz, M., Uttich, E., Wanieck, K., Bender, B., Wartzack, S.
An approach to transfer biological solutions based on the interaction of mechanisms to technical products
Proceedings of the Design Society 2, 831–840. https://doi.org/10.1017/pds.2022.85

Buchhorn, N.; Stottrop, M.; Bender, B.
Influence of active cooling at the trailing edge on the thermal behavior of a tilting-pad journal bearing.
Lubricants 9, 26_1–26_18. doi: 10.3390/lubricants9030026

Cangioli, F.; Livermore-Hardy, R.; Pethybridge, G.; Mermertas, U.; Stottrop, M.; Bender, B.
Experimental investigation and numerical modelling of a large heavily-loaded tilting pad journal bearing with polymer lined pads.
In ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition September 21–25, 2020 Virtual, Online, pp. V10AT25A037_1–V10AT25A037_11. doi: 10.1115/gt2020-16319

Hoffmann, A.; Remus, R.; Bender, B.
An Active Hybrid Model of the Human Lumbosacral Spine: Facet Joint Integration in a Multi-Objective Optimization of Muscle Forces
In ISSLS Virtual Annual Meeting, May 31 - June 4, 2021, p.71

Göhlich, D.; Bender, B.; Fay, T. A.; Gericke, K.
Product requirements specification process in product development
Proceedings of the Design Society, 1, 2459-2470.

Hoffmann, A.; Remus, R.; Bender, B.
Potentials to Study Load Sharing Mechanisms Adjacent to Interbody Fusions with Active Hybrid Lumbosacral Models
26th Congress of the European Society of Biomechanics, July 11-14, 2021, Milan, Italy

Krahl, A.; Witzel, U.
Foreflipper and hindflipper muscle reconstructions of Cryptoclidus eurymerus in comparison to functional analogues: introduction of a myological mechanism for flipper twisting
PeerJ 9:e12537. https://doi.org/10.7717/peerj.1253

Lipphaus, A.; Tröbs, R.-B.; Wegener-Panzer, A.; Witzel, U.
Computational simulation of growth after temporal proximal tibial hemiepiphysiodesis in idiopathic genu valgum.
Osteologie 30, 58–58. doi: 10.1055/s-0040-1722112.

Lipphaus, A.; Wegener-Panzer, A.; Tröbs, RB; Witzel, U.
Computational modelling of proximal and distal epiphyseal and appositional growth of the femur in children
XXVIII Congress of the International Society of Biomechanics from the 25 – 29 July, Digital Congress

Lipphaus, A.; Tröbs, R.-B.; Witzel, U.
Chances and challenges of computational simulation of fracture healing in children
39th Meeting of the Pediatric Section of the German Society of Trauma Surgeons (DGU). Eur J Trauma Emerg Surg 47, 883 (2021). https://doi.org/10.1007/s00068-021-01692-2

Lipphaus, A.; Uttich, E.; Remus, R.; Hoffmann, A.; Bender, B.; Witzel, U.
Applications and limitations of finite element method, multibody simulation, and hybrid modeling in bone biomechanics
Osteologie 30, 4. https://doi.org/10.1055/s-0041-1736721

Lipphaus, A.; Tröbs, RB.; Wegener-Panzer, A.; Witzel, U.
Biomechanische Simulation der Entstehung eines Genu valgum bei Hüftdysplasie
Deutscher Kongress für Orthopädie und Unfallchirurgie (DKOU), October 26-29, Berlin. https://doi.org/10.3205/21dkou475

Lipphaus, A.; Klimek, M.; Witzel, U.
Comparative Finite Element Analysis of Fixation Techniques for APC II Open-Book Injuries of the Pelvis
Biomechanics 1 (3), 321-333. https://doi.org/10.3390/biomechanics1030027

Pereira, A.R.; Lipphaus, A.; Ergin, M.; Salehi, S.; Gehweiler, D.; Rudert, M.; Hansmann, J.; Herrmann, M.
Modeling of the human bone environment: mechanical stimuli guide mesenchymal stem cell-extracellular matrix interactions
Materials 14. doi: 10.3390/ma14164431

Remus, R.; Lipphaus, A.; Neumann, M.; Bender, B.
Calibration and validation of a novel hybrid model of the lumbosacral spine in ArtiSynth - The passive structures
PLoS ONE 16(4): e0250456. https://doi.org/10.1371/journal.pone.0250456

Remus, R.; Hoffmann, A.; Bender, B.
An Active Hybrid Model of the Human Lumbosacral Spine: Simple and Robust Modeling of Facet Joints
In ISSLS Virtual Annual Meeting, May 31 - June 4, 2021, p.181

Remus, R.; Hoffmann, A.; Bender, B.
Instantaneous axis of rotation as indicator for lumbar intervertebral disc degeneration – A simulation study
26th Congress of the European Society of Biomechanics, July 11-14, 2021, Milan, Italy

Remus, R.; Uttich, E.; Bender, B.
Sensitivity of biomechanical responses in path optimized follower loads considering the lumbosacral load sharing
XXVIII Congress of the International Society of Biomechanics from the 25 – 29 July, Digital Congress

Stottrop, M.; Bender, B.
Overview of an approach to numerical modelling and experimental validation of journal bearings.
In 14th WCCM & ECCOMAS Congress 2020: virtual congress 11-15 January, 2021 : book of abstracts (ed. Chinesta, F., Abgrall, R., Allix, O., Néron, D., and Kaliske, M.), pp. 3419–3420.

Stottrop, M.; Engels, A.; Bender, B
Simulationsgestützter Ansatz zur verformungsgerechten Gestaltung von hydrodynamischen Radialgleitlagern: Kompensation von Wellenschiefstellungen mithilfe Axialer Laufflächenprofilierungen
In: Gleit- und Wälzlagerungen 2021. Presented at the VDI-Fachtagung Gleit- und Wälzlagerungen, pp. 111–122

Stottrop, M.; Bender, B
Mechanical and thermal deformation analysis of a large polymer lined tilting pad journal bearing
In: Proceedings of the ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition. Presented at the ASME Turbo Expo. https://doi.org/10.1115/gt2021-58734

2020

Bender, B.; Kossack, F.; Song, Y.-W.; Sehrt, J. T.; Mehring, B.; Kranz, J.
Leitlinie zur Berücksichtigung Additiver Fertigungsverfahren in der Entwicklung.
In Konstruktion für die Additive Fertigung 2019 (ed. Lachmayer, R., Rettschlag, K., and Kaierle, S.), pp. 13–28. doi: 10.1007/978-3-662-61149-4_2

Neumann, M.; Remus, R.; Sauerhoff, M.; Lipphaus, A.; Uttich, E.; Sure, C.; Baier, J.; Bartz, M.; Bender, B.
Digitale Zwillinge in Interaktion mit Menschmodellen
ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb: Vol. 115, No. special, pp. 116-120. https://doi.org/10.3139/104.112327

Sauerhoff, M.; Neumann, M.; Bender, B.
Knieorthesen-Modulsystem zur Verbesserung der individuellen Passgenauigkeit bei unterschiedlichen Schenkelumfängen — Modulsystem gewährleistet individuelle Passgenauigkeit auch bei unterschiedlichsten Schenkelumfängen
Orthopädie Technik - Rehabilitation, Medizinprodukte: 71(4). pp. 48-51. Apr. 2020

Kattwinkel, D.; Bender, B.
Competences for the development of ecodesign products
Proceedings of the Design Society: DESIGN Conference. Cambridge University Press, 1, pp. 1735–1744. doi: 10.1017/dsd.2020.43

Grahle, A.; Song, Y.-W.; Brüske, K.; Bender, B.; Göhlich, D.
Autonomous Shuttles for urban Mobility on Demand Applications - Ecosystem dependent Requirements Elicitation.
DESIGN 2020 16th International Design Conference, Dubrovnik, Croatia. https://doi.org/10.1017/dsd.2020.100

Witzel, U.
Funktionsmorphologische Forschung mit Hilfe biomechanischer Ansätze im Rahmen der Phylogenie und ontogenetischen Entwicklung zum Vertebraten.
In: Werneburg I, Betz O (Hrsg.). Phylogenie, Funktionsmorphologie und Bionik. Texte zum 60. Phylogenetischen Symposium in Tübingen. Tübingen: Scidinge Hall

Brillinger, A.-S.; Els, C.; Schäfer, B.; Bender, B.
Business model risk and uncertainty factors: Toward building and maintaining profitable and sustainable business models
Business Horizons 63(1), pp. 121-130. Oct. 2019. doi: 10.1016/j.bushor.2019.09.009

Lipphaus A.; Witzel U.
Three-dimensional finite element analysis of the dural folds and the human skull under head acceleration.
The Anatomical Record 304: 384-392. doi: 10.1002/ar.24401

Uttich, E.; Bender, B.
An approach to compare tension chording concepts by using combined multibody and finite element simulation
In: Krause, D., Paetzold, K., Wartzack, S. (Eds.), Proceedings of the 31st Symposium Design for X. Presented at the Symposium Design for X, TuTech Innovation, Hamburg, pp. 11–20. https://doi.org/10.35199/dfx2020.2

Uttich, E.; Bartz, M.; Bender, B.
Examining the tension chording principle for a beam under torsion load.
Proceedings of the Design Society / International Conference in Engineering Design 1, 431–440. doi: 10.1017/dsd.2020.60

Shabestari, S. S.; Bender, B.; Neumann, M.; Song, Y.-W.
Decision support for Design Conflicts: A model-based method to analyze the interactions between technical requirements and product characteristics
Proceedings of the Design Society: DESIGN Conference , Volume 1 , May 2020 , pp. 1735 - 1744
doi: 10.1017/dsd.2020.43

2019

Bartz, M., Uttich, E., Bender, B.
Transfer of lightweight design principles from the musculoskeletal system to an engineering context.
Design science 5, 1–21. https://doi.org/10.1017/dsj.2019.17

Song, Y.-W., Herzog, M., Bender, B.
Understanding the initial requirements definition in early design phases.
Proceedings of the Design Society / International Conference in Engineering Design 1, 3751–3760. doi: 10.1017/dsi.2019.382

Song, Y.-W., Kossack, F., Bender, B.
Methodisches Entwickeln von Anforderungen in der Produktentwicklung.
In Design for X: DS 98: Proceedings of the 30th Symposium Design for X (DFX 2019), 18-19 September 2019, Jesteburg, Germany, pp. 123–134. doi: 10.35199/dfx2019.11

Shabestari, S. S., Herzog, M., Bender, B.
A survey on the applications of machine learning in the early phases of product development.
Proceedings of the Design Society / International Conference in Engineering Design 1, 2437–2446. doi: 10.1017/dsi.2019.250

Seebach, N., Rück, M., Arlt, F., Bender, B.
A matrix-based approach to investigate the geometrical dependencies between non-driving-related tasks and future vehicle concepts.
Proceedings of the Design Society / International Conference in Engineering Design 1, 2815–2822. doi: 10.1017/dsi.2019.288

Seebach, N., Colleselli, M., Arlt, F., Bender, B.
CAD-Integration fahrfremder Tätigkeiten in die frühe Konzeptphase automatisierter Fahrzeuge.
In 14. Magdeburger Maschinenbautage: Magdeburger Ingenieurtage - 24. und 25. September 2019, pp. 11–18.

Seebach, N., Arlt, F., Bender, B.
Nutzerzentrierte Einbindung fahrfremder Tätigkeiten in die geometrische Konzeption automatisierter Fahrzeuge.
In Stuttgarter Symposium für Produktentwicklung SSP 2019 - Agilität und kognitives Engineering: Stuttgart, 16. Mai 2019 : wissenschaftliche Konferenz ; Abstractheft, pp. 263–272. doi: 10.18419/opus-10394

Jordan, T., Bender, B., Herzog, M., Song, Y.-W.
A model-based approach to identify barriers in design knowledge reuse.
Proceedings of the Design Society / International Conference in Engineering Design 1, 2427–2436. doi: 10.1017/dsi.2019.249

Uttich, E., Bartz, M., Bender, B.
Factors preventing the use of a lightweight design workflow that is Inspired by the human locomotive system.
Proceedings of the Design Society / International Conference in Engineering Design 1, 2705–2714. doi: 10.1017/dsi.2019.277

Krahl A, Lipphaus A, Sander PM, Maffuci F, Hochscheid S, Witzel U.
Humerus osteology, myology, and finite element structure analysis of Cheloniidae.
The anatomical record. 303, 2177-2191. doi: 10.1002/ar.24311

Tröbs, R.-B., Witzel, U., Lipphaus, A.
Fetal growth of infants with esophageal atresia.
Kongress für Kinder- und Jugendmedizin. 11. - 14. September 2019 in München

Lipphaus, A., Witzel, U.
Interaction of sutures, dural folds, and muscle forces on cranial loading studied through finite element analysis.
In International Congress of Vertebrate Morphology (ICVM) Abstract Issue 2019, Supplement 280:S1, pp. S23–S24.

Witzel, U., Lipphaus, A.
Functional morphology of the zygomatic arch and the zygomatico-temporal suture in primates.
In International Congress of Vertebrate Morphology (ICVM) Abstract Issue 2019, Supplement 280:S1, p. S27.

2018

Baier J., Jedowski J., Loitz J., Neumann M., Bender B.
Development of an Anatomically-Based Forearm Model to Simulate Selective Muscle Activation
In Book of Abstracts: 22nd Annual IFESS Conference 2018; 29.-31.08.2018 Nottwil

Bartz M., Brand H., Bender B.
Examing lightweight design potential of the human musculoskeletal system by using the example of an articulated arm robot
In Book of Abstracts: 1. Symposium for Lightweight Design in Product Development; 13. - 15. Juni 2018 Zürich

Bartz M., Gößling R., Remus R., Bender B.
Development of a bioinspired approach for the design of kinematic chains
Proceedings of the DESIGN 2018 15th International Design Conference. doi:10.21278/idc.2018.0330

Bartz M., Remus R., Bender B.
Anwendung der Leichtbauprinzipien des Muskel-Skelett-Systems auf einen Gelenkarmroboter
Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, 7-8-2018, pp. 84-90, 2018. ISSN: 0720-5953

Buchhorn, N., Bender, B., Kukla, S. and Neumann, M.
Tilting-pad journal bearing in hybrid operation: a numerical and experimental investigation
In Proceedings of the ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition: Structures and Dynamics Oslo, Norway, June 11–15, 2018, pp. V07BT34A007_1–V07BT34A007_11. doi: 10.1115/GT2018-75256

Buchhorn N., Kukla S., Bender B., Neumann M.
Tilting-pad journal bearing in hybrid operation – a numerical and experimental investigation
In: Proceedings of the ASME Turbo Expo, ASME Paper No. GT2018-75256, Oslo, Norway, June 2018

Kattwinkel D., Song YW., Bender B.
Analysis of ecodesign and sustainable design in higher education
In Proceedings of the DESIGN 2018,15th International Design Conference: 15th International Design Conference (DESIGN 2018), Dubrovnik, Croatia, 21/05/2018 - 24/05/2018, pp. 2451–2460. doi:10.21278/idc.2018.0305

Lipphaus A., Witzel U.
Biomechanical study of the development of long bones: Finite element structure synthesis of the human second proximal phalanx under growth conditions The Anatomical Record, angenommen
The anatomical record 302, 1389–1398. doi: 10.1002/ar.24006.

Lipphaus A., Witzel U.
Finite element syntheses of callus and bone remodeling: Biomechanical study of fracture healing in long bones The Anatomical Record, angenommen
The anatomical record 301, 2112–2121. doi: 10.1002/ar.23893.

Seebach N., Fitzen F., Arlt F., Bender B.
Geometrische Beschreibung fahrfremder Tätigkeiten
In Proceedings of the 29th Symposium Design for X (DFX 2018): 29th Symposium on Design for X, pp. 251–261; doi: 10.18726/2018_3

Song YW., Windheim M., Bender B.
Challenges in the definition and prioritisation of requirements: a case study
In Proceedings of the DESIGN 2018,15th International Design Conference: 15th International Design Conference (DESIGN 2018), Dubrovnik, Croatia, 21/05/2018 - 24/05/2018, pp. 1337–1344. doi:10.21278/idc.2018.0368

Uttich E., Bartz M., Gößling R., Bender B.
Systematic review of the mechanisms of action in the musculoskeletal system as a basis for new simulation models.
Poster, presented at the 8th World Congress of Biomechanics, 08.07.2018 – 12.07.2018, on 09.07.2018 in Dublin.

2017

Bartz M, Gößling R, Remus R, Schafran T, Bender B
Entwicklung eines bioinspirierten Gelenkarmroboters mithilfe der Kopplung von Mehrkörpersimulation und Topologieoptimierung
In 35. CADFEM ANSYS Simulation Conference: die Fachkonferenz zur Numerischen Simulation in der Produktentwicklung, 15.-17. November 2017 in Koblenz

Kruppert S, Horstmann M, Weiss LC, Witzel U, Schaber CF, Gorb SN, Tollrian R
Biomechanical properties of predator-induced body armour in the freshwater crustacean Daphnia
Scientific reports 7, 9750_1–9750_13. doi:10.1038/s41598-017-09649-5

Kukla S, Buchhorn N, Bender B
Design of an axially concave pad profile for a large turbine tilting-pad bearing
Proceedings of the Institution of Mechanical Engineers / J 231, 479–488. doi:10.1177/1350650115592919

Lippert B, Ahrens M, Dekhiar J, Louhichi R, Song YW, Toepfer F, Briede J, Vajna S, Paetzold K, Borg J
Integrated product development project in a multi-cultural and multi-professional background team: challenges and key success factors
In Design education, pp. 21–30

Uttich E, Gößling R, Bartz M, Bender B
Inversdynamische Berechnungen der Muskelkräfte am Glenohumeralgelenk unter der Prämisse der Biegeminimierung
In: 35. CADFEM ANSYS Simulation Conference. Presented at the Forum Digital City, CADFEM GmbH, Grafing bei München.

Song YW, Chahin A, Scholle P, Bender B, Gräßler I, Paetzold K
Optimierung des Produktentwicklungsprozesses mittels Risikoanalyse vernetzter Anforderungen
In Design for X: Beiträge zum 28. DfX Symposium, Oktober 2017, pp. 339–351

Shabestari S, Bender B
Enhanced integrated sensitivity analysis in model based QFD method
DS 87-4 Proceedings of the 21st International Conference on Engineering Design (ICED 17) Vol 4: Design Methods and Tools, Vancouver, Canada, 21-25.08.2017

Baier J, Kuchinke L, Neumann M, Bender B
Form and Function - Exemplary Analysis of the Significance for the Design of Rehabilitation Devices
ICORR 2017, International Conference on Rehabilitation Robotics, 17-20th July 2017

Kuhlenkötter B, Wilkens U, Bender B, Abramovici M, Süße T, Göbel J et al.
New Perspectives for Generating Smart PSS Solutions – Life Cycle, Methodologies and Transformation
Procedia CIRP 64, S. 217–222

Jordan T, Bender B, Herzog M, Neumann M
A matrix-based concept to analyse the reuse of product maintenance information in future product developments
Proceedings of the 17th International Dependency and structure modeling conference, DSM 2017, Espoo, Finland, September 11 – 13, 2017

Herzog M, Bender B
Competences for the development of smart products
Weber, Christian; Husung, Stephan; Cascini, Gaetano; Cantamessa, Marco; Marjanović, D. (2017): The 21st International Conference on Engineering Design (ICED17). 21 – 25 August 2017, University of British Columbia, Vancouver, Canada, 2017

Kuhlenkötter B, Wilkens U, Bender B, Abramovici M, Göbel J, Herzog M, Hypki A, Lenkenhoff K
Coping with the challenges of engineering smart product service systems - Demands for research infrastructure
Weber, Christian; Husung, Stephan; Cascini, Gaetano; Cantamessa, Marco; Marjanović, D. (2017): The 21st International Conference on Engineering Design (ICED17). 21 – 25 August 2017, University of British Columbia, Vancouver, Canada, 2017

Kattwinkel D, Herzog M, Neumann M, Bender B
Environmental impacts during the product usage - Identification and categorization of influencing factors
Weber, Christian; Husung, Stephan; Cascini, Gaetano; Cantamessa, Marco; Marjanović, D. (2017): The 21st International Conference on Engineering Design (ICED17). 21 – 25 August 2017, University of British Columbia, Vancouver, Canada, 2017

Shabestari S, Bender B
Model based QFD method with the integrated sensitivity analysis
2017 Annual IEEE International Systems Conference (SysCon), Montreal, QC, 2017, pp. 1-6

2016

Ahlfeld C, Zülch J, Bender B
Konzeptualisierung eines Ansatzes zur handlungsorientiert-systemischen Weiterentwicklung eins Strukturmodells zur Untersuchung der Wirkbeziehungen in Innovationsmanagementsystemen

Krahl, A, Witzel, U, Sander, P M
Muscle reconstruction and finite element analysis of humeri in Plesiosaurs and Sea Turtles by dissection of the latter. Annual Meeting of the European Association of Vertebrate Palaeontologists
Haarlem, The Netherlands

Kattwinkel D, Song YW, Herzog M, Neumann M, Bender, B
Analysis of existing approaches for the support of planning processes within new product development projects
In Proceedings of NordDesign 2016, pp. 380–389

Kuchinke LM, Sauerhoff M, Neumann M, Bender B
New conceptual approaches in the orthopaedic knee brace supply
In Proceedings of NordDesign 2016, pp. 227–237

Preuschoft, H, Schönwasser, K-H, Witzel, U
Selective value of characteristic size parameters in Hylobatids. A biomechanical approach to small ape size and morphology
In U. H. Reichard et al. (eds), Evolution of Gibbons and Siamang, Developments in Primatology : Progress and Prospects (2016)

Neumann M, Bender B
Risk-oriented development of innovative products: a model-based approach
In Proceedings of NordDesign 2016, pp. 350–359

Bartz M, Gößling R, Bender B, Waschinsky N, Ricken T
Entwicklung eines mehrphasigen FE-Modells zur Analyse der mechanischen Spannungen im Oberschenkelknochen unter physiologischen Belastungen
In 34. CADFEM ANSYS Simulation Conference: die Fachkonferenz zur Numerischen Simulation in der Produktentwicklung, 5.-7. Oktober 2016, Nürnberg

Buchhorn N, Kukla S, Bender B
Increased Load Carrying Capacity of Large Tilting-Pad Journal Bearings by Injection of Cold Oil
In: Proceedings of the ASME Turbo Expo 2016, Seoul, South Korea, 2016. (reviewed conference proceedings)

Bender B, Marion S
Dimensions of Product Development Success
In: Marjanović, D.; Štorga, M.; Pavković, N.; Bojčetić, N.; Škec, S. (Hrsg.), DS 84: Proceedings of the DESIGN 2016 14th International Design Conference; 2016, pp 1455-1464

Herzog M, Köster M, Sadek T, Bender B
Die frühen Phasen der IPSS-Entwicklung. Charakteristische Herausforderungen und methodische Unterstützung (1)
In: H. Meier und E. Uhlmann (Hg.): Industrielle Produkt-Service Systeme. Entwicklung, Betrieb und Management. 1. Aufl. Springer-Verlag Berlin Heidelberg: Springer Vieweg.

Herzog M, Köster M, Sadek T, Bender B
Die frühen Phasen der IPSS-Entwicklung. Charakteristische Herausforderungen und methodische Unterstützung (2)
In: H. Meier und E. Uhlmann (Hg.): Industrielle Produkt-Service Systeme. Entwicklung, Betrieb und Management. 1. Aufl. Springer-Verlag Berlin Heidelberg: Springer Vieweg.

Bender B, Gericke K
Entwicklungsprozesse
In: Lindemann, Udo (2016): Handbuch Produktentwicklung.Carl Hanser Verlag, München 2016.

Song Y, Herzog M, Kreimeier D, Bender B
Prototype of a new Learning Factory – An educational approach to integrate Production and Product Development
In: Proceedings of the International Design Conference DESIGN 2016, Dubrovnik, Kroatien, 2016. (reviewed conference proceedings)

Sefen C, Habersetzer J, Witzel U
Biomechanical aspects of incisor action of beavers (Castor fiber L.)
Journal of Mammalogy, 2016. (Article published online, peer-reviewed journal article)

Klenner S, Witzel U, Paris F, Distler C
Structure and function of the septum nasi and the underlying tension chord in crocodylians.
Journal of Anatomy, 2016. 228, pp113-124 (veröffentlicht, peer-reviewed journal article)

Berthaume MA, Dobson C, Witzel U, Fagan M
Skeletal immaturity, rostral sparing, and disparate hip morphologies as biomechanical causes for Legg-Calvé-Perthes´ Disease.
Clinical Anatomy, 2016: pub proof (peer-reviewed journal article)

2015

Neumann M, Sporbeck M, Sadek T, Bender B
A model based approach to support risk management in innovation projects
Modelling and management of engineering processes: proceedings of the 3rd international conference 2013, pp. 35–46. doi:10.1007/978-3-662-44009-4_4

Bender B, Steven M
Erfolgsindikatoren in der technischen Produktentwicklung
Die Unternehmung, Vol. 69, No. 4, 2015, pp. 354-370.

Witzel U, Krahl A, Sander PM
Hydrodynamische Untersuchung des Schwimmvorgangs eines jurassischen Plesiosauriers: Bestimmung des Körperwiderstands und der Vortriebskräfte der Flossen.
In: Proceedings oft he Jahrestagung der Paläontologischen Gesellschaft, 2015. (reviewed conference proceedings)

Scholle P, Song Y, Herzog M, Bender B, Gräßler I
Methoden der Anforderungsstrukturierung zur Steuerung von Produktentwicklungsprozessen
Design for X - Beiträge zum 26. DfX-Symposium Oktober 2015 / Dieter Krause, Kristin, Paetzold, Sandro Wartzack (Hrsg).
TUTech Innovation (Verlag)

Herzog M
Überarbeitung der VDI 2221 – Bericht aus dem Gremium GPP FA 701 Methodische Produktentwicklung
In: Proceedings of the Stuttgarter Symposium für Produktentwicklung, Stuttgart, Germany, 2015. (Poster)

Bender B, Kreimeier D, Herzog M, Wienbruch T
Learning Factory 2.0 – Integrated view of Product Development and Production.
In: Proceedings of the 5th Conference on Learning Factories, Bochum 2015. (eingereicht zur Konferenz, reviewed conference proceedings).

Herzog M, Bender B, Sadek T
Dienstleistungsorientierte Geschäftsmodelle als Innovationstreiber für Industrie 4.0 – Implikationen aus Sicht der Produktentwicklung
In: Proceedings of the Stuttgarter Symposium für Produktentwicklung, Stuttgart, Germany, 2015. (eingereicht)

Bender B, Buchhorn N, Kukla S
Design of an axially concave pad profile for a large turbine tilting-pad bearing
In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 2015. (peer-reviewed journal article)

Kukla S, Buchhorn N, Bender B
Increase Of Operational Safety Of Tilting-pad Journal Bearings By Extraction Of Hot Oil At The Trailing Edge
In: Proceedings of the ASME Power Conference 2015, San Diego (CA), 2015. (reviewed conference proceedings)

Song Y, Herzog M, Bender B, Meuris D
Konzipierung industrieller Produkt-Service Systeme – Charakteristische Herausforderungen und methodische Unterstützung
Werkstatttechnik online (7/8), Springer Verlag. -2015-

2014

Sporbeck J, Gößling R, Bender B
Modellbildung der unteren Extremitäten und simulationsgestützte Auswertung von Gangparametern
Design for X - Beiträge zum 25. DfX-Symposium Oktober 2014 / Dieter Krause, Kristin, Paetzold, Sandro Wartzack (Hrsg).
Friedrich-Alexander-Universität Erlangen-Nürnberg Lehrstuhl für Konstruktionstechnik

Meuris D, Herzog M, Bender B, Sadek T
The Conceptual Design Stage of Industrial Product Service Systems (IPS2) – Learning from Industrial Use-Case
In: Proceedings of the 10th Design Society NordDesign Conference, Helsinki, Finland, 2014. (veröffentlicht mit Konferenz, reviewed conference proceedings)

Herzog M, Meuris D, Bender B, Sadek T
The nature of risk management in the early phase of IPS² design.
In: Proceedings of the 6th CIRP Conference on Industrial Product-Service Systems, Winsdor, Kanada, 2014. (veröffentlicht mit Konferenz, reviewed conference proceedings)

McCormack, S W, Witzel, U, Watson, P J, Fagan, M J, Gröning, F
The biomechanical function of periodontal ligament fibres in orthodontic tooth movement
PLOS ONE , Vol 9, Issue 7, e102387, pp 1-13 (2014)

Curtis N, Witzel U, Fagan MJ
Development and three-dimensional morphology of the zygomaticotemporal suture in primate skulls.
Folia Primatologica, 2014. (veröffentlicht, peer-reviewed journal article)

Meuris D, Herzog M, Bender B, Sadek T
IT-support in the fuzzy front end of Industrial Product-Service Design.
In: Proceedings of the 6th CIRP Conference on Industrial Product-Service Systems, Winsdor, Kanada, 2014. (veröffentlicht mit Konferenz, reviewed conference proceedings)

Gößling R, Herzog M, Witzel U, Bender B:
Compensation of bending moments as a nature-inspired design principle?
In: Proceedings of the International Design Conference DESIGN 2014, Dubrovnik, Kroatien, 2014. (reviewed conference proceedings)

Fechner R, Gößling R
The Gastralial Apparatus of Plateosaurus Engelhardti : Morpholoical Description and Soft-Tissue Reconstruction.
Palaeontologia Electronica. 17 (1): 1–11.

2013

Neumann M, Sporbeck M, Sadek T, Bender B.
Agile product development for innovation projects: a model based approach.
In: Proceedings of the Modelling and Management of Engineering Processes Workshop, Magdeburg, Germany, 2013. (veröffentlicht, reviewed conference proceedings)

Schanz T, Lins Y, Barciaga T, Läbe S, Preuschoft H, Witzel, U, Sander M
Quantitative interpretation of tracks for determination of body mass.
PLOS ONE, Vol 8, Issue10, e77606, pp 1-12, 2013. (veröffentlicht, peer- reviewed journal article)

Labenda P
Safeguarding Trafficability of a Wheeled, Snake-like Reconnaissance Robot on Rough Terrain by a Shared Control System based on Fuzzy Logic.
Proceedings of the IEEE International Conference on Industrial Technology, Kapstadt, Südafrika, -2013-

Schanz, T, Lins, Y, Barciaga, T, Läbe, S, Preuschoft, H, Witzel, U, Sander, M
Quantitative interpretation of tracks for determination of body mass
PLOS ONE, Vol 8, Issue10, e77606, pp 1-12 (2013)

Wendland M, Herzog M, Labenda P
Inverse Funktionsmodellierung zur Zuverlässigkeits-steigerung in frühen Entwicklungsphasen.
Proceedings of the Stuttgarter Symposium für Produktentwicklung, Stuttgart, Germany, -2013-

Herzog M, Meuris D, Koester M, Sadek T
Playful conceptual design of industrial product service systems: An Experiment.
In: Proceedings of the DESIGN 2013, Seoul, South Korea, -2013-

Herzog M, Meuris D, Sadek T
An industrial evaluation of a game-oriented approach for successful collaborative IPS²-development.
Proceedings of the Co-Create 2013, Espoo, Finnland, -2013-

Hagemann T, Kukla S, Schwarze H
Measurement and prediction of the static operating conditions of a large turbine tilting-pad bearing under high circumferential speeds and heavy loads.
Proceedings of the ASME Turbo Expo, San Antonio (TX), USA, -2013-

Kukla S, Hagemann T, Schwarze H:
Measurement and prediction of the dynamic operating conditions of a large turbine tilting-pad bearing under high circumferential speeds and heavy loads.
Proceedings of the ASME Turbo Expo, San Antonio (TX), USA, -2013-

Herzog M, Meuris D, Köster M, Sadek T
Battleships: An industrial use-case of ‘Playful’ teaching IPS² concept generation.
Proceedings of the 5th CIRP Conference on industrial Product Service Systems, Bochum, Germany, -2013-

Fechner R, Stratmann M, Gößling R, Sverdlova N
The functional role of the ischiopubic membrane for the mechanical loading of the pubis in the domestic fowl (Gallus gallus).
Journal of Anatomy, Wiley and Sons 2013 222:305-312, -2013-

McCormack S, Gröning F, Witzel U, Fagan MJ
The influence of fibrous periodontal ligament on tooth movement and load transfer: A 3D finite element study.
Abstract, European Society of Biomechanics. Patras, -2013-

Brown A, Curtis N, Witzel U, Fagan MJ
Optimisation of muscle forces to minimise tensile loading of the femur.
Abstract, European Society of Biomechanics. Patras, 2013.

Perry SF, Sverdlova N, Lambertz M, Witzel U
A computational fluid dynamics (CFD) model for estimating heat exchange in the trachea of long-necked animals.
Abstract, 10th International Congress of Vertebrate Morphology, Barcelona, -2013-

Witzel U
How we can use structural analysis and force-driven synthesis of skull form to predict dynamic loading in extinct and extant vertebrates.
Abstract, 10th International Congress of Vertebrate Morphology, Barcelona, -2013-

Witzel U
Analyse und Synthese biomechanischer Systeme.
Abstract, Kolloquium Werkstofftechnik, Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin, -2013-

Hohn-Schulte B, Preuschoft H, Witzel U, Distler-Hoffmann C
Biomechanics and functional preconditions for terrestrial lifestyle in basal tetrapods, with spezial consideration of Tiktaalik roseae.
Historical Biology: An International Journal of Paleobiology, DOI:10.1080/08912963.2012.755677, -2013-

Curtis N, Witzel U, Fagan MJ
Development and 3D morphology of the zygomatico-temporal suture in primate skulls.
Journal of Anatomy. -2013-

Sverdlova N, Arkali F, Witzel U, Perry SF
Computational fluid dynamics model of avian respiratory temperature control as a model for sauropod dinosaurs.
Journal for Respiratory Physiology and Neurobiology. -2013-

2012

Hamp Q, Gorgis O, Labenda P, Neumann M, Predki T, Heckes L, Kleiner A, Reindl L
Study of efficiency of USAR operations with assistive technologies.
Journal Advanced Robotics, -2012-

Witzel, U
Analyse und Synthese biomechanischer Systeme.
Fortschritte in der Werkstoffprüfung für Forschung und Praxis. Düsseldorf, Verlag Stahleisen, -2012-

Labenda, P.
Shared Control System to Safeguard Mobility of Wheeled, Actively Articulated Truck-Trailer Vehicles on Structured and Rough Terrain.
Proceedings of the Intelligent Transportation Systems Conference, Anchorage, USA. -2012-

Labenda, P.; Predki, T.; Heckes, L. und Sadek, T.
Traditional and Project- and Team-based Education in Mechatronic and Robotic Systems Design.
Proceedings of the Interdisciplinary Engineering Design Education Conference, Santa Clara, USA. -2012-

Heckes, L.; Predki, T. und Labenda, P.
A Wireless Contact Point Sensor for Tracked Robots.
Proceedings of the 4th Annual IEEE International Conference on Technologies for Practical Robot Applications, TePRA, Massachusetts, USA. -2012-

Neumann, M.; Sadek, T. und Labenda, P.
Integrating structure and uncertainty modeling using Multiple-Domain-Matrices.
Proceedings of the International Design Conference, DESIGN 2012, Dubrovnik, Kroatien. -2012-

Neumann, M.; Sadek, T. und Labenda, P.
Adapting product and development process for risk reduction in new product development.
Proceedings of the International Conference on product Lifecycle Management, Montreal, Kanada. -2012-

Wendland, M.; Labenda, P. und Sadek, T.
An experimental study in improving Dependability by Inverse Functional Modeling.
Proceedings of the International Design Conference, DESIGN 2012, Dubrovnik, Kroatien. -2012-

Neumann, M.; Predki, T.; Heckes, L. und Labenda, P.
Snake-like, tracked, mobile robot with active flippers for urban search-and-rescue tasks.
Proceedings of the 15th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, CLAWAR, Baltimore, USA. -2012-

Lygin, K.; Labenda, P. und Sadek, T.
Prediction of transformation behavior of R-phase SMA actuators by the application of fuzzy logic.
Proceedings of the European Symposium on Martensitic Transformation, ESOMAT 2012, St. Petersburg, Russland. -2012-

Neumann, M.; Sadek, T. und Labenda, P.
An enhanced model for risk analysis in new product development.
Proceedings of NordDesign 2012, Aalborg, Dänemark. -2012-

Lygin, K.; Langbein, S.; Labenda, P. und Sadek, T.
A methodology for the development, production and validation of R-phase actuators.
Journal of Materials Engineering and Performance, JMEP, Springer Verlag. -2012-

Köster, M. und Sadek, T.
A Framework for Domain Allocation in early Phases of Industrial Product-Service System Design.
Proceedings of the International Design Conference, DESIGN 2012, Dubrovnik, Kroatien. -2012-

Herzog, M. und Sadek, T.
Sustainable IPS²-Business Models for Galvanizing high quality Sanitary Fittings.
Proceedings of the 4th CIRP Conference on Industrial Product Service Systems, Tokio, Japan. -2012-

Köster, M. und Sadek, T.
Domain Allocation in the Fuzzy Front End of IPS² Development using Gamestorming.
Proceedings of the 4th CIRP Conference on Industrial Product Service Systems, Tokio, Japan. -2012-

Fechner, R.
The mechanical design of the archasaurian pelvis.
Terra Nova, Jahrestagung der Paläontologischen Gesellschaft, Berlin, Deutschland. -2012-

Fechner, R. und Schwarz-Wings, D.
The muscles of the infrapubic abdominal wall of a 6-month-old Crocodylus niloticus (Reptilia: Crocodylia).
Anatomia, Histologia, Embryologia: (online advanced publication). DOI: 10.1111/ahe.12000 -2012-

Fechner, R.; Stratmann, M.; Gößling, R. und Sverdlova, N.
The functional role of the ischiopubic membrane for the mechanical loading of the pubis in the domestic fowl (Gallus gallus).
Journal of Anatomy: (online advanced publication). DOI: 10.1111/joa.12015 -2012-

Sverdlova, N.S.; Lambertz, M.; Witzel, U. und Perry, S.F.
Boundary conditions for heat transfer and evaporative cooling in the trachea and air sac system of the domestic fowl: a two-dimensional CFD analysis.
PLoS One (DOI:10.1371/journal.pone.0045315) -2012-

2011

Labenda, P.; Neumann, M. und Sadek, T.
Wheeled, kinematically redundant locomotion system for mobility-oriented research and experimentation.
Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2011, Washington, USA. -2011-

Neumann, M.; Predki, T.; Heckes, L.; Sadek, T. und Grafen, M.
Geländeadaptive Kontrolle mobiler Roboter in unstrukturierten Einsatzumgebungen.
Konferenzband zum Wissenschaftsforum Intelligente Technische Systeme 2011, Paderborn, Deutschland. -2011-

Rietzscher, H, Spies, M, Schwiesau, J, Pfaff, A, Schilling, C, Mittmann, K, Witzel, U.
Festigkeitsanalyse neuer 2,0 mm und 2,4 mm DCP-Zwischengrößen mit herkömmlichen 2,0 mm und 2,7 mm DCP-Knochenplatten
Kleintierpraxis 56, Heft 7, 349-352 (2011)

Preuschoft H, Hohn B, Stoinski S, Witzel U
„Why so huge? Biomechanical reasons for the acquisition of large size in sauropod and theropod dinosaurs.”
In: Klein N., Remes K., Gee CT., Sander PM, (eds): Biology of the Sauropod Dinosaurs: Understanding the life of giants. Bloomington: Indiana University Press, 2011.(veröffentlicht, Buchkapitel)

Witzel U
„Virtual synthesis of the skull in Neanderthals by FESS“
In: S. Condemi and G.C. Weniger (Eds.): Continuity and Discontinuity in the Peopling of Europe. One Hundred Fifty Years of Neanderthal Study.Springer, Vertebrate Paleobiology and Paleoanthropology Series, 2011.(veröffentlicht, Buchkapitel)

Lygin, K.; Langbein, S.; Labenda, P. und Sadek, T.
Production Process and Validation of R-phase Actuators.
Proceedings of the International Conference on Shape Memory and Superelastic Technology, SMST 2011, Hong Kong, China. -2011-

De Micheli PO, Witzel U
„Microstructural mechanical study of a transverse osteon under compressive loading: The role of fiber reinforcement and explanation of some geometrical and mechanical microscopic properties.”
Journal of Biomechanics 44 , 1588-1592, 2011. (veröffentlicht, peer- reviewed journal article)

Lygin, K.; Langbein, S.; Labenda, P. und Sadek, T.
Development of an Adjusting Mechanism for an Air Flap Based on R-phase Transformation.
Proceedings of the International Conference on Shape Memory and Superelastic Technology, SMST 2011, Hong Kong, China. -2011-

Langbein, S.; Lygin, K. und Sadek, T.
Significance of requirements for the implementation of new technologies using shape memory technology.
Proceedings of the International Conference on Engineering Design, ICED 2011, Kopenhagen, Schweden. -2011-

Sadek, T. und Wendland, M.
Design for Dependability - Identifying potential weaknesses in product concepts.
Proceedings of the International Conference on Engineering Design, ICED 2011, Kopenhagen, Schweden. -2011-

Wendland, M.; Meuris, D. und Sadek, T.
Heterogeneous Modeling as a basis for improving the reliability of product concepts.
Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition, Denver, USA. -2011-

Sadek, T. und Köster, M.
Sach- und dienstleistungsintegrierte Konzeptentwicklung.
In: Meier, H. und Uhlmann, E. (Hrsg.): Integrierte Industrielle Sach- und Dienstleistungen - Vermarktung, Entwicklung und Erbringung hybrider Leistungsbündel, Springer Verlag. -2011-

Köster, M. und Sadek, T.
A Product-Service System for Industrial Waste Heat Recovery using mobile latent heat accumulators.
Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition, Denver, USA. -2011-

Köster, M. und Sadek, T.
Einführung in die modellbasierte Konzeptpartitionierung hybrider Leistungsbündel.
Werkstatttechnik online (7/8), Springer Verlag. -2011-

Sadek, T. und Köster, M.
Conceptual Development of Industrial Product-Service Systems.
Journal of Enterprise Modeling and Information Systems Architectures, EMISA, Special Issue "Service Systems Modeling", German Informatics Society, ISSN: 1860-6059. -2011-

Theiss, R.; Sadek, T. und Langbein, S.
Content based Support for Annotating new Content in a wiki for Shape Memory Technology.
Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2011, Washington, USA. -2011-

Theiss, R.; Sadek, T. und Langbein, S.
A personalized Recommender System to support SMT-based Product Development.
Advanced Engineering Informatics, ELSEVIER, ISSN: 1474-0346. -2011-

Theiss, R.; Sadek, T. und Langbein, S.
Recommending Engineering Knowledge in the Product Development Process with Shape Memory Technology.
Proceedings of the 7th International Conference of Digital Enterprise Technology, DET2011, Athen, Griechenland. -2011-

Kukla, S. und Sadek, T.
Improvement of the calculation of hydrodynamic systems by considering the dynamic deformation caused by vibration.
Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2011, Washington, USA. -2011-

Ressing, H. und Kukla, S.
Improving rotordynamic performance of an axial flow compressor with two-lobe bearings using nonlinear constraint parameter optimization.
Proceedings of the ASME Turbo Expo 2011, Vancouver, Kanada. -2011-

Curtis N, Witzel U, Fitton L, O'Higgins P, Fagan M
“The mechanical significance of the temporal fasciae in Macaca fascicularis: an investigation using finite element Analysis.”
The Anatomical Record 294: 1178-1190, 2011. (veröffentlicht, peer- reviewed journal ar-ticle)

Rauhut, O.; Fechner, R.; Remes, K. und Reis, K.
How to get big in the Mesozoic: the evolution of the sauropodomorph body plan.
In: Klein, N., Remes, K., Gee, C. T. and Sander, P. M. (eds.), Biology of the Sauropod Dinosaurs: Understanding the Life of Giants, 119–149. Indiana University Press, Bloomington. ISBN 978-0-253-35508-9 -2011-

Witzel U, Mannhardt J, Gößling R, De Micheli, Preuschoft H
“Finite element analyses and virtual syntheses of biological structures and their application to sauropod skulls”
In: Klein N., Remes K., Gee CT., Sander PM, (eds): Biology of the Sauropod Dinosaurs: Understanding the life of giants. Bloomington: Indiana University Press.2011. (veröffentlicht, Buchkapitel)

Sander, P. M.; Christian, A.; Clauss M.; Fechner, R.; Gee, C. T.; Griebeler, E.-M.; Gunga, H.-C.; Hummel, J.; Mallison, H.; Perry, S. F.; Preuschoft, H.; Rauhut, O. W. M.; Remes, K.; Tütken, T.; Wings, O. und Witzel, U.
Biology of the sauropod dinosaurs: the evolution of gigantism.
Biological Reviews of the Cambridge Philosophical Society 86 (1): 117–155. DOI: 10.1111/j.1469-185X.2010.00137.x -2011-

Sadek, T. und Köster, M.
Analyzing the Practical Usability of the Heterogeneous Modeling Approach for Conceptual Product-Service System Development.
Proceedings of the 3rd CIRP International Conference on Industrial Product Service Systems, Braunschweig, Deutschland. -2011-

Langbein, S.; Lygin, K. und Sadek, T.
New concepts for shape memory actuator systems.
Proceedings of the of the 140th TMS 2011, San Diego, USA. -2011-

Sverdlova, N.S.
Tensile Trabeculae - Myth or Reality?
Journal of Musculoskeletal and Neuronal Interactions, 11(1): 1-7. -2011-

nach oben

2010

Labenda, P.; Sadek, T. und Heckes, L.
Considerations for enhanced rough terrain mobility of kinematically redundant locomotion systems.
Proceedings of the 5th IFAC Symposium on Mechatronic Systems, Cambridge, Massachusetts, USA, ELSEVIER, ISBN 978-3-902661-760. -2010-

Neumann, M. und Sadek, T.
Scalability of Mechatronic Systems.
Proceedings of the International Design Conference – Design 2010, Dubrovnik, Kroatien. -2010-

Labenda, P.; Sadek, T. und Predki, T.
Controlled Maneuverability of an Articulated Tracked Mobile Robot.
Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2010), Montreal, Quebec, Kanada. -2010-

Preuschoft, H, Hohn, B, Scherf, H, Schmidt, M, Krause, C, Witzel, U
Functional Analysis of the Primate Shoulder
Int J Primatol 31:301-320 (2010)

Labenda P.; Sadek T. und Predki T.
Zur Kontrollierbarkeit segmentierter, mobiler Robotersysteme. | Abstract
7. Paderborner Workshop Entwurf mechatronischer Systeme, Paderborn, Deutschland. -2010-

Labenda, P. und Sadek, T.
„Design for Trafficability“ of kinematically redundant locomotion systems.
International Design Conference−DESIGN 2010, Dubrovnik, Kroatien. -2010-

Richter, A.; Sadek, T. und Steven, M.
Flexibility in industrial product-service systems and use-oriented business models. | Abstract
CIRP Journal of Manufacturing Science and Technology, ELSEVIER, DOI: 10.1016/j.cirpj.2010.06.003. -2010-

Sadek, T.; Köster, M. und Herzog, M.
Design for Changeability - Initiale Entwicklungsentscheidungen in der Konzeptentwicklung von Produkt-Service Systemen.
Proceedings of the 21th Symposium "Design for X", Hamburg, TuTeck Innovation GmbH, ISBN 978-3-941492-23-3. -2010-

Sadek, T.; Meuris, D. und Wendland, M.
An experimental study on comprehending heterogeneous modeling. | Abstract
Proceedings of NordDesign 2010, Göteborg, Sweden. -2010-

Sadek, T. und Meuris, D.;
Datentechnische Integration und Visualisierung von Anforderungen innerhalb von CAD-Systemen.
Proceedings of MobIs 2010, Dresden, Deutschland. -2010-

Sadek, T.; Meuris, D. und Wendland, M.
Interdependencies between teaching engineering skills and heterogeneous concept modeling for sustainable products−Findings based on an experimental study. | Abstract
Proceedings of 14th SIG IFIP 5.7 Workshop 2010, Experimental learning on Sustainable Management, Economics and Industrial Engineering, Mailand, Italien. -2010-

Sadek, T. und Steven, M.
Design of PSS Revenue Models.
Proceedings of 2nd CIRP IPS² Conference. Linköping, Schweden. -2010-

Sadek, T.; Köster, M. und Herzog, M.
INITIAL DECISION MAKING (IDM) IN THE EARLY STAGE OF PRODUCTSERVICE SYSTEM DEVELOPMENT. | Abstract
Proceedings of the 8th International Conference on Manufacturing Research ICMR 2010, University of Durham, United Kingdom. -2010-

Sadek, T. und Köster, M.
Eine modellorientierte Methodik zur Unterstützung der Konzeptentwicklung industrieller Produkt-Service Systeme. | Abstract
Proceedings of Dienstleistungsmodellierung 2010, Workshop im Rahmen der Modellierung 2010, Klagenfurt, Österreich. -2010-

Sadek, T.; Lygin, K. und Langbein, S.
SMA Actuator System for Unlocking Tasks in Interiors of Vehicles.
Proceedings of the 12th International Conference and Exhibition on New Actuators and Drive Systems, Bremen, Deutschland, ISBN 978-3-933339-13-3. -2010-

Langbein, S.; Sadek, T. und Czechowicz, A.
ADAPTIVE RESETTING OF SMA-ACTUATORS. | Abstract
Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), Philadelphia, USA. -2010-

Langbein, S. und Sadek, T.
DESIGN FOR FUNCTIONAL INTEGRATED SHAPE MEMORY ALLOY SYSTEMS. | Abstract
International Design Conference−DESIGN 2010, Dubrovnik, Kroatien. -2010-

Lygin, K.; Langbein, S. und Sadek, T.
Development and Test of Force-Locked Connecting Elements for Shape Memory Alloy Wires. | Abstract
Proceedings of the International Conference on Shape Memory and Superelastic Technology Conference (SMST), Pacific Grove, USA. -2010-

Langbein, S.; Czechowicz, A.; Sadek, T. und Meier, H.
Strategies for Self-Repairing Shape Memory Alloy Actuators. | Abstract
Proceedings of the International Conference on Shape Memory and Superelastic Technology Conference (SMST), Pacific Grove, USA. -2010-

Lygin, K.; Schmidt, C.; Langbein, S. und Sadek, T.
Plastic integration of shape-memory components. | Abstract
Proceedings of the 11th International Conference on New Actuators, Bremen, Germany. -2010-

Sadek, T.; Lygin, K. und Langbein, S.
SMA Actuator System for Unlocking Tasks in Interiors of Vehicles. | Abstract
Proceedings of the 11th International Conference on New Actuators, Bremen, Germany. -2010-

Sverdlova, N.
Preoperative Simulation of the Hip-Stem Osseointegration based on the Physiological Loading Conditions. | Abstract
Proceedings of World Congress on Biomechanics 2010 (WCB), Singapore, Republic of Singapore. -2010

Sverdlova, N. und Witzel, U.
Principles of determination and verification of muscle forces in the human musculoskeletal system: muscle forces to minimise bending stress. | Abstract
Journal of Biomechanics. -2010-

nach oben

2009

Labenda, P. und Sadek, T.
Integration von Effizienzbetrachtungen in die frühen Entwicklungsphasen von redundanten Bewegungssystemen. | Abstract
20. Symposium "Design for X", Neukirchen, Deutschland. -2009-

Labenda, P.; Predki, T.; Heckes, L.; Schütze, T. und Welp E.G.
Entwicklung eines regelbaren Brems-/Kupplungssystems auf der Basis von Piezoelementen. | Abstract
6. Paderborner Workshop Entwurf mechatronischer Systeme, Paderborn. -2009-

Welp, E.G.; Labenda, P. und Wendland, M.
Wissensbasiertes Fehlermanagement für die präventive Verlässlichkeitsabsicherung in frühen Entwicklungsphasen. | Abstract
Tagung VDI Technische Zuverlässigkeit 2009, Leonberg. -2009-

Welp, E. G.; Labenda, P. und Neumann, M.
Kognitive Robotik in der Sicherheitstechnik.
KONSTRUKTION, 3. -2009-

Sadek, T. und Theiß, R.
Knowledge Based Assistance for Conceptual Development of Industrial Product-Service Systems. | Abstract
6th CIRP-Sponsored International Conference on Digital Enterprise Technology, Hong Kong, VR China. -2009-

Sadek, T.
A MODEL BASED APPROACH FOR CONCEPTUAL DEVELOPMENT OF INDUSTRIAL PRODUCT-SERVICE SYSTEMS. | Abstract
Proceedings of the INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, ICED'09, STANFORD UNIVERSITY, STANFORD, CA, USA. -2009-

Sadek, T. und Theiß, R.
Concept Modelling of IPS²−Combination of IPS² objects and IPS² processes. | Abstract
Proceedings of the 2nd International Seminar on IPS², Berlin, Germany. -2009-

Richter, A.; Sadek, T.; Steven, M. und Welp, E.G.
Use-Oriented Business Models and Flexibility in Industrial Product-Service Systems. | Abstract
1st CIRP Industrial Product-Service Systems (IPS²) Conference, Cranfield, United Kingdom. -2009- (Best Paper Award 2009)

Langbein, S. und Lygin, K.
Influence of thermo mechanical pre-treatment on efficiency and temperature stability of shape memory alloys. | Abstract
Proceedings of the 8th European Symposium on Martensitic Transformartions (ESOMAT), Prague, Czech Republic. -2009-

Langbein, S.
Development of standardised and integrated shape memory components in "one-module"-design. | Abstract
Proceedings of the 8th European Symposium on Martensitic Transformartions (ESOMAT), Prague, Czech Republic. -2009-

Langbein, S.
Design of highly integrated systems on the basis of programmed shape memory alloy components. | Abstract
Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), Oxnard, USA. -2009-

nach oben

2008

Welp E. G.; Neumann M.; Labenda P. und Jansen S.
Realisierung dreidimensionaler Kinematiken in Form eines modularen funktionskomplexen Bewegungssystems. | Abstract
Tagung VDI Bewegungstechnik 2008, Fulda. -2008-

Welp E. G.; Labenda P.; Neumann M.; Tran M.-Q. und Jansen S.
Modulare Robotik in der Entwicklung funktionskomplexer Lokomotions- und Handhabungssysteme. | Abstract
Tagung VDI Robotik 2008, München. -2008-

Welp, E.G.; Labenda, P.; Neumann, M. und Jansen, S.
Provision of Basis for a new Snake-like Reconnaissance Robot for Disaster Situations. | Abstract
Proceedings of the ASME 2008 International Design Engineering Technical Conference & Computers and Information in Engineering Conference (IDETC/CIE 2008). -2008-

Witzel, U.; Rieger, W; Effenberger, H
Three-dimensional stress analysis of threaded cups- a finite element analysis
International Orthopaedics (SICOT) 32:195-201 (2008)

Witzel, U
Biomechanik der Hüftschäfte
In Effenberger (Hrsg) „Hüftschäfte“, Effenberger Grieskirchen (2008)

Effenberger, H; Bösl, O; Witzel, U; Linke, B
Eindrehverhalten von Schraubpfannen“, “Screw-in Performance of Threaded Cups
Z Orthop Unfall 146: 185-193 (2008)

Welp, E.G.; Labenda, P.; Neumann, M.; Tran, M.-Q. und Jansen, S.
Modular robotics in the development of multifunctional locomotion and manipulation systems. | Abstract
Proceedings of the Mechatronics 2008. -2008-

Moser, K; Rauhut, O; Witzel, U
Morphology and function of the neck of Plateosaurus
Journal of Paleontology, Astracts: 68th Annual Meeting Society of Vertebrate Paleontology 2008

Hohn, B; Witzel, U; Preuschoft, H
3D finite element structure synthesis of the shoulder girdle in Diplodocus longus
Journal of Vertebrate Paleontology, Abstracts: 68th Annual Meeting Society of Vertebrate Paleontology (2008)

Goessling, R; Witzel, U; Distler, C
Biomechanical investigations of the long snout in Plateosaurus
Journal of Vertebrate Paleontology, Abstracts: 68th Annual Meeting Society of Vertebrate Paleontology (2008)

Welp, E. G.; Meier, H.; Sadek, T. und Sadek, K.
Modelling Approach for the Integrated Development of Industrial Product-Service Systems. | Abstract
Proceedings of the 41st CIRP Conference on Manufacturing Systems, Hongo Campus, The University of Tokyo, Japan. -2008-

Welp, E.G.; Sadek, T.; Theiß, R. und Köster, M.
Ansatz einer wissensbasierten Beschreibungssprache zur funktionsorientierten Beschreibung von hybriden Leistungsbündeln. | Abstract
Proceedings of the 19. Symposium "Design for X", Neukirchen, 09. und 10. Oktober 2008 -2008-

Richter, A. und Sadek, T.
Verfügbarkeitsorientierte Geschäftsmodelle und Flexibilität industrieller Produkt-Service Systeme.
Werkstattstechnik online (7-2008), Springer Verlag. -2008-

Welp, E.G. und Sadek, T.
Conceptual Design of Industrial Product Service Systems (IPS²) based on the extended heterogeneous Modelling Approach. | Abstract
Proceedings of the International Design Conference−Design 2008. -2008-

Welp, E.G.; Sadek, T. und Theiß, R.
Novel Modelling Approach for Integrated Engineering of IPS²-Concepts in Early Development Phases. | Abstract
Proceedings of the International Seminar on PSS 2008. -2008-

Karger, M.; Richter, A.; Sadek, T. und Strotmann, W.C.
Flexibility of Industrial Product Service Systems−An Assessment Based on Concept Modelling. | Abstract
Proceedings of the 3rd Annual International Conference on Business Market 2008. -2008-

Welp, E.G.; Meier, H.; Sadek, T. und Sadek, K.
Modelling Approach for the integrated Development of Product-Service Concepts in early Development Phases.
Proceedings of the 41st CIRP Conference on Manufacturing Systems 2008. -2008-

Welp, E. G.; Sadek, T.; Müller, P. und Blessing, L.
Integrated modelling of products and services−The conceptual design phase in an integrated IPS² development process. | Abstract
Proceedings of the CIRP Design Conference 2008: Design Synthesis. -2008-

Langbein, S.; Welp, E. G. und Sohn, J.
Langbein, S.; Welp, E. G.; Sohn, J. | Abstract
Proceedings of the 11th International Conference on New Actuators, Bremen. -2008-

Langbein, S. und Welp, E. G.
Generation of Smart Structures on the Basis of in-situ Configuration of Shape Memory Alloys. | Abstract
Advances in Science and Technology, Vol. 59 pp 184-189, Trans Tech Publications, Switzerland. -2008-

Langbein, S. und Welp, E. G.
"One-module"-actuators based on partial activation of shape memory components. | Abstract
Proceedings of the International Conference on Shape Memory and Superelastic Technology Conference (SMST), Stresa, Italy. -2008-

Welp, E.G. und Niebuhr, V.
Ein Prognoseverfahren für Satinageergebnisse von Kalanderwalzen mit Kunststoffbelägen (Prediction procedure for calendering results of calender rolls with elastomer covers).
ipw. The magazine for the International pulp and paper industry (no.5) p. 53-63, 2008. -2008-

Sverdlova, N. und Witzel, U.
Biomechanical analysis of the stress distribution in a femur before and after implantation.
Proceedings of the 15th Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and related fields. Ulm, Germany. -2008-

nach oben

2007

Welp, E. G.; Labenda, P. und Bludau, C
Usage of Ontologies and Software Agents for Knowledge-Bases Design of Mechatronic Systems. | Abstract
Proceedings of the 16th International Conference on Engineering Design (ICED 07) (2007), 28.−31.08.2007. -2007-

Welp, E. G. und Labenda, P.
Kurzbeiträge in: Innovationspotenziale in der Produktentwicklung.
Krause, F.−L.; Franke, H.−J.; Gausemeier, J. (Hrsg.): Veröffentlichung des Berliner Kreises ISBN 978−3−446−40667−4. -2007-

Welp, E. G.; Sadek, T. und Labenda,P.
Ausbildung von Entwicklern neu gestaltet: Teamorientiertes und interdisziplinäres Studieren.
InTouch Ruhr−Universität Bochum, Lehrstuhl für Maschinenelemente und Konstruktionslehre (LMK) − Ausgabe Juni 2007. -2007-

Welp, E. G.; Labenda, P. und Jansen, S.
Entwicklung eines biologisch inspirierten Bewegungssystems. | Abstract
VDI Berichte zur VDI−Tagung Mechatronik 2007, Innovative Produktentwicklung. Wiesloch 23./24.05.07 − VDI−Bericht Nr.1971, S. 417−433 − 2007 − ISBN 978−3−18−091971−3

Preuschoft, H; Witzel, U; Hohn, B; Schulte, D; Distler, C
Biomechanics of locomotion and body structure in varanids with special emphasis on the forelimbs
In: H.-G. Horn, W. Böhme and U. Krebs (Eds.): Mertensiella, Supplement to Salmandra, Advances in Monitor Research III (2007)

Preuschoft, H; Hohn, B; Distler, C; Sick, H; Witzel, U
Ribs and rib cage of terrestrial vertebrates. Their development in evolution, biomechanical function, analysed by FESA

Hasselbach, C v; Witzel, U
Klinik und Biomechanik des Knorpelersatzimplantates HemiCAP
Deutsche Gesellschaft für Unfallchirurgie, Berlin, Abstract (2007)

Welp, E. G. und Labenda, P.
Partitionierung mechatronischer Systeme am Beispiel eines schlangenartigen Robotersystems.
Konstruktion, Zeitschrift für Produktentwicklung und Ingenieur−Werkstoffe. -2007-

Sadek, T.; Müller, P.; Welp, E. G. und Blessing, L.
Integrierte Modellierung von Produkten und Dienstleistungen − Die Konzeptphase im Entwicklungsprozess hybrider Leistungsbündel.
Proceedings of the 18. Symposium "Design for X". 11.10−12.10.2007. -2007-

Welp, E.G. und Sadek, T.
Industrial Product Service Systems (IPS²) − A Shift of Paradigms in Product Development. | Abstract
Proceedings of the 16th International Conference on Engineering Design (ICED 07), Paris, France. -2007-

Jansen, S. und Welp, E. G.
A heterogeneous Modelling Approach for Domain Allocation in Mechatronics.
Proceedings of the 16th International Conference on Engineering Design (ICED 07) (2007), 28.−31.08.2007. -2007-

Welp, E. G. und Langbein, S.;
Survey of the in-situ configuration of cold-rolled, nickel rich NiTi sheets to create variable component functions.
Material Science and Engineering, Elsevier Science. -2007-

Scheyer, T M; Sander, P M; Joyce, W G; Böhme, W; Witzel, U
A plywood structure in the shell of fossil and living soft-shelled turtles (Trionychidae) and its evolutionary implications
Organisms, Diversity & Evolution7, 136-144 (2007)

Witzel, U
Eine neue Methode zur virtuellen Schädelsynthese am Beispiel Camarasaurus
In J. Erfurt und L. Maul (Hrsg) Beiheft 23 zum „Halleschen Jahrbuch für Geowissenschaften“, Halle /Saale (2007)

Welp, E. G. und Langbein, S.
Neue Ansätze zur Baukastensystematik von Formgedächtnisaktoren.
VDI Berichte zur VDI−Tagung Mechatronik 2007, Innovative Produktentwicklung. Wiesloch 23./24.05.07. − VDI−Bericht Nr.1971, S. 417−433 − 2007 − ISBN 978−3−18−091971−3

Langbein, S. und Welp, E.G.
Formgedächtnisaktoren für miniaturisierte Anwendungen.
Tagungsband zum 5. Paderborner Workshop "Entwurf mechatronischer Systeme", Paderborn 22.und 23.03.2007. -2007-

Welp, E. G. und Niebuhr, V.
Interaction of Time Dependent, Thermal and Hygroscopic Characteristics and Runnability Properties of Paper.
Proceedings of the 9th International Conference on Web Handling (IWEB'07). -2007-

Welp, E. G. und Niebuhr, V.
Rolling Contact Problems and Physical Interactions in Calendering of Paper.
Proceedings of the 9th International Conference on Web Handling (IWEB'07). -2007-

Welp, E. G. und Kleinert, A.
Analytical Models for the Gap Throttle Effect at Foil Bearings and Webrollers.
Proceedings of the 9th International Conference on Web Handling (IWEB'07). -2007-

Welp, E. G. und Niebuhr, V.
Untersuchung der Satinageeigenschaften von Kalanderwalzen mit Kunststoffbelägen.
Forschungsbericht LMK−VDP, INFOR Forschungsprojekt 61, März 2007, Lehrstuhl für Maschinenelemente und Konstruktionslehre, Ruhr−Universität Bochum. -2007-

Kühl, S.; Schüler, D. und Schüler, E.
Messverfahren zur experimentellen Bestimmung dynamischer Koeffizienten von Gleitlagern.
tm Technisches Messen 74 (2007), Oldenbourg Verlag. -2007-

Sverdlova, N. und Witzel, U.
Stress distribution in femur under application of physiological loads.
Proceedings of the 14th Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and related fields. Ulm, Germany. -2007-

nach oben

2006

Welp, E.G.; Labenda, P. und Jansen, S.
Teaching Theory and Practice in Mechatronics Engineering.
Proceedings of the Design 2006 − 9th International Design Conference. − 2006 −

Welp, E.G. und Labenda, P.
Mechatronic Engineering - Teaching and Learning.
Research and Education in Mechatronics, REM 2006, KTH, Stockholm, Schweden. -2006-

Jansen, S. und Welp, E.G
Modellbasierte Partitionierung mechatronischer Systeme am Beispiel eines multifunktionalen Bewegungssystems.
4. Paderborner Workshop − 2006 −

Welp, E.G.
Methodenbasierte Produktentwicklung und Konstruktion − Aktivitäten des LMK.
Vortrag FZ Jülich. − 2006 −

Breidert, J.; Welp, E. G. und Langbein, S.
Modular Shape Memory Actuator System.
Proccedings of the 10th International Conference on New Actuators (ACTUATOR), Bremen. -2006-

Welp, E.G. und Kleinert, A
Die Spaltdrosselfolie als neuartiges Element zur Vermeidung des Bahnaufschwimmens an umschlungenen Walzen.
ipw (Das Papier). − 2006 −

Welp, E.G. und Niebuhr, V.
Modelling of mechanical paper properties for analyzing and optimizing paper fabrication processes.
Presentation at the Pulp & Paper Centre, University of Toronto − 2006 −

Welp, E.G.; Wolf, E. und Niebuhr, V.
Advanced complete paper material description for analyzing and optimizing paper fabrication processes.
Proceedings of the 2006 Progress in Paper Physics − A Seminar (An annual meeting of the International Paper Physics Community) − 2006 −

Kühl, S. und Schüler, E.
Advancement of a radial journal bearing for highest load capacity for big stream turbines for power generation.
7th IFToMM−Conference on Rotor Dynamics − 2006 −

Witzel, U.
Virtual Synthesis of the Skull in Neanderthals by FESS.
Terra Nostra − 150 Years of Neanderthal Discoveries. − 2006 −

Witzel, U. und Gößling, R.
Deductive Virtual Synthesis of a Sauropod Skull, e.g. Camarasaurus by FESS.
SVP 66th Annual Meeting. − 2006 −

nach oben

2005

Welp, E.G.; Bludau, C. und Labenda, P.
Nutzung von Ontologien zum Wissens- und Produktdatenmanagement in der Entwicklung mechatronischer Systeme.
Informations− und Wissensdrehscheibe Produktdatenmanagement. − 2005 − ISBN 3−936771−55−3

Bludau, C. und Welp, E.G.
Semantic Web Services for the Knowledge−Based Design of Mechatronic Systems.
Proceedings of the 15th International Conference on Engineering Design (ICED),ISBN−1−904670−00−8. − 2005 −

Bludau, C. und Welp, E.G.
Semantic Web Services für den wissensbasierten Entwurf mechatronischer Systeme.
3. Paderborner Workshop: Intelligente mechatronische Systeme. − 2005 −

Jansen, S. und Welp, E.G.
Ein Werkzeug zur modellbasierten Partitionierung mechatronischer Systeme.
VDI, Mechatronik Wiesloch. − 2005 −

Seifert, H.
Methodenunterstützte Analyse der Kennlinie eines Brennstoffzellen−Stacks.
ATZ 4/2005, Teil 1 − 4/2005, Teil 1. − 2005 −

Breidert, J. und Welp, E.G.
Modulares Aktorsystem auf der Basis von Formgedächtnistechnik.
VDI−Berichte − Nr.1892.1, ISBN 3−18−091892−6. − 2005 −

Jansen, S. und Welp, E.G.
Model-Based Design of Actuation Concepts. A Support for Domain Allocation in Mechatronics.
Proceedings of the 15th International Conference on Engineering Design (ICED), ISBN−1−904670−00−8. − 2005 −

Langbein, S.; Welp, E.G.; Schmitz, S. und Ludwig, A.
Entwicklung von Formgedächtnis−Dünnschichtaktoren für haptische Anwendungen.
50. Internationales Wissenschaftliches Kolloquium; Technische Universität Ilmenau. − 2005 −

Welp, E.G.; Kleinert, A. und Smukala, V.
Influence of the Gap Throttle Effect on the Winding Process and Roll Quality.
Proceedings of the 8th International Conference on Web Handling (IWEB'05).− 2005 −

Welp, E.G.; Wolf, E. und Niebuhr, V.
A complete material law of Paper for modelling and simulation of finishing processes.
Proceedings of the 8th International Conference on Web Handling (IWEB'05). − 2005 −

Effenberger, H.; Imhof, M.; Witzel, U. und Rehart, S.
Zementfreie Hüftschäfte.
Orthopäde − 34: 477−502. − 2005 −

Preuschoft, H. und Witzel, U.
The functional shape of the skull in vertebrates, under consideration of primates and ancestral synapsids.
Anatomical Record Part A 283A − Part A 283A. − 2005 -

Rossmann, T.; Witzel, U. und Preuschoft H.
Mechanical stress as the main factor in skull design of the fossil reptile Proterosuchus (Archosauria).
Bionik, Aktuelle Forschungsergebnisse in Natur−, Ingenieur− und Geisteswissenschaft − 517−528. − 2005 −

Witzel, U.
Screw Socket for an Artificial Hip Joint.
European Patent − EP 0 887 052 B1. − 2005 −

Witzel, U.
Biomechanik der Hüftschäfte.
Frankfurter Orthopädie Symposium − 2005 −

Witzel, U.
Langfristige Verankerung künstlicher Gelenke − kann das gut gehen?
Bionik, Aktuelle Forschungsergebnisse in Natur−, Ingenieur− und Geisteswissenschaft − 575−592. − 2005 −

Witzel, U. und Preuschoft, H.
Finite Element Model Construction for the Virtual Sythesis of the Skulls in Vertebrates: Case study in Diplodocus.
Anatomical Record − Part A 283A: 391−401. − 2005 −

nach oben

2004

Giannoulis, D. und Welp, E.G.
Object−oriented product modeling for early assembly cost Estimation.
Proceedings of the 8th international design conference (DESIGN 2004) − Vol. 2 , pp. 761−766, ISBN 953−6313−59−6. − 2004 −

Welp, E.G.
Methodenbasierte Entwicklung mechatronischer Komponenten.
Kolloquium Konstruktionsmethodik in der Praxis − Einsatzmöglichkeiten und Grenzen − TU Braunschweig − Bericht Nr. 66. − 2004 −

Welp, E.G. und Giannoulis, D.
Knowledge−Based cost estimation of product concepts.
Proceedings of ASME 'Design Engineering Technical Conferences & Computers and Information in Engineering Conference' (DETCÂ´04). − 2004 − DETC2004−57766

Breidert, J. und Welp, E.G.
Development of modular actuator systems.
Proceedings of the 8th International Design Conference (DESIGN 2004) − Vol. 2, pp. 1199−1204, ISBN 953−6313−61−8. − 2004 −

Preuschoft, H; Witzel, U
The Functional Shape of the Skull under Consideration of Ancestral Synapsids and Primates
Abstract, Journal of Morphology Vol. 260, Number 3 (2004)

Jansen, J.; Breidert, J. und Welp, E.G.
Positioning Actuator based on Shape Memory Wires.
Proceedings of the 9th International Conference on New Actuators (ACTUATOR) − S. 94−97 − ISBN−3−933339−07−3. 2004 −

Welp, E.G. und Breidert, J.
Knowledge and method base for Shape Memory Alloys.
Materialwissenschaft und Werkstofftechnik − Heft 5/2004, Seiten 294−299 − 2004 − ISSN 0933−5137

Welp, E.G. und Jansen, S.
Domain allocation in mechatronic products.
Proceedings of the 8th International Design Conference (DESIGN 2004) − Vol. 2 , pp. 1349−1354 − 2004 − ISBN 953−6313−59−6

Welp, E.G. und Langbein, S.
Measures for optimisation of the dynamic behaviour of Shape Memory Actuators.
Shape Memory and Superelastic Technologies (SMTS 2004). - 2004 -

Welp, E.G.
Herausforderungen in der Papierausrüstung.
IPW (Das Papier) − 38078 − 2004 −

Preuschoft, H. und Witzel, U.
Functional structure of the skull in hominoidea.
Folia primatologica − 75 (4) 219−252 − 2004 −

Effenberger, H.; Imhof, M. und Witzel, U.
Aktueller Stand der Pressfit−Pfannen.
Orthopädische Praxis − Vol.40, 11# S.637−647 − 2004 −

Effenberger, H.; Koebke, J.; Wilke, R.; Hautmann, J.; Witzel, U.; Imhof, M. und Richolt, J.
Acetabulumforum und zementfreie Hüftpfannen − Vergleich von Arthroseacetabula mit Implantatformen.
Der Orthopäde − Online publiziert: 19. März 2004, 1433−0431 (Online), DOI: 10.1007/s00132−004−0640−5 − 2004 − ISSN: 0085−4530 (Paper)

Preuschoft, H. und Witzel, U.
A biomechanical approach to craniofacial shape in primates using FESA.
Annals of Anatomy − 186, S.397−404 − 2004 −

Witzel, U.; Effenberger, H. und Rieger, W.
Dreidimensionale Spannungsanalyse bei Schraubpfannen.
Schraubpfannen − 2004 −

Witzel, U. und Preuschoft H.
Finite Element Model Construction for the Virtual Synthesis of the Skulls in Primates.
Journal of morphology − Vol. 260, Number 3 − 2004 −

Witzel, U.; Preuschoft H. und Sick, H.
The role of the zygomatic arch for the statics of the skull and it s adaptive shape.
Folia primatologica − 75 (4) 202−218 − 2004 −

Witzel, U.; Rieger, W. und Effenberger, H.
3−D Finite Elemente Analyse zementfreier Hüftpfannen.
Pressfitpfannen − 2004 −

nach oben

Wissenschaftliche Publikationen

Lehrstuhl für Produktentwicklung

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004